-16%
SF-CV233ZFIB-F4N1 – Bullet 4 in 1 – 1/2.9″ Sony© 2.2 Mpix Exmor, 2.8~12 MotoZoom
90.00 € 76.00 €
90.00 € 76.00 €
Name | POE084832 |
Code | M18278 |
Input voltage | 176-264 VAC, 50 Hz |
Output voltage range | 45.6-52.8 VDC |
Max output power | 153.6 W |
Rated efficiency | 87% |
Max total output current | 3.2 A @ 48 V |
Number of outputs | 8 |
Max output current of individual outputs | 0.4 A @ 48 V |
Short circuit protection | fuses or PTCs |
Overload protection | automatic |
Overvoltage protection | automatic |
Operating temperature | -10°C…40°C |
Dimensions (W x H x D) | 270 x 307 x 116 |
Weight | 3.7 kg |
Remarks | Metal housing, 15 mm spacing between the rear panel and wall |
Name | ULTIPOWER 0098at |
Code | N29992 |
Standards and protocols | IEEE802.3, 802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP |
Forwarding rate | 10BASE-T: 14880 pps/port 100BASE-TX: 148800 pps/port |
Transmission method | Store-and-Forward |
Ports | 9x RJ45 10/100 Mbps (incl. 8x PoE); auto-negotiation, auto MDI/MDIX |
Cabling requirements | 10Base-T: UTP cat. 3, 4 or 5 (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) 100Base-Tx: UTP cat. 5 or 5e (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) |
LED indicators | Power, Link/Act, 100M, PoE Status |
Certification | CE |
Dimensions [mm] | 285x190x45 |
Environment | Operating temperature range: 0°C…40°C Storage temperature range: -40°C…70°C Operating humidity range: 10%…90% (no condensation) Storage humidity range: 5%…90% (no condensation) |
Power | 230 VAC |
Other features | Support for PoE (PD) devices compliant with IEEE 802.3af and 802.3at standards Support for auto-learning and auto-aging of MAC addresses Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode |
Name | HIKVISION DS-2CD2T52-I5 |
Code | K17886 |
Video system | IP |
Housing type | Compact |
Compression | H.264/H.264+/MJPEG |
Resolution | 2560 x 1920 |
Dual-stream | Yes |
Frame rate | 20 fps @ 2560×1920 25 fps at lower resolutions |
Image sensor | 1/3″ Progressive Scan CMOS |
Sensitivity | 0.01 lx @F1.2 with AGC ON 0 lx in IR mode |
Lens | 6 mm |
Horizontal viewing angle | 43.3° |
Mechanically switching IR filter | Yes |
IR range | up to 50 m |
Brightness control | Yes |
Sharpness control | Yes |
ROI | Yes |
Video processing | 3D-DNR, D-WDR, BLC |
Gain | Automatic/Preset |
Alarm events | Motion detection, dynamic analysis, tampering |
Intelligent image analysis | Yes |
Line crossing | 1 line |
Intruder detection | 1 region |
ROIs | 1 region |
Recording | NAS (NFS, SMB/CIFS) |
Network interface | RJ-45 10/100Base-T |
Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
Supported standards | Onvif, PSIA,CGI, ISAPI |
Power | 12 VDC ± 10% PoE IEEE 802.3af |
Power consumption | max. 7.5 W |
Startup temperature range | -10°C …+40°C |
Operating temperature range | -30°C …+60°C |
Dimensions | 300 × 86 × 85 mm |
Weight | 1.2 kg |
Name | ULTIPOWER 124-4POE-20 |
Code | N29973 |
Standards and protocols | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow control IEEE 802.1Q VLAN IEEE 802.3af |
Functions | PoE IEEE 802.3af MAC auto-learning and auto-aging Bandwidth control for full duplex (IEEE802.3x), back pressure control (half-duplex) |
Frame forward rate | 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port |
Transmission method | Store-and-Forward |
Ports | 4x RJ45 10/100Mbps PoE 2x FO 2x SC 20 km SM |
Network cabling requirements | 10Base-T: UTP cat. 3, 4 or 5 (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) 100Base-Tx: UTP cat. 5 or 5e (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) |
LED indicators | PWR1, PWR2, F1, POE |
ESD immunity | < 6 kV |
Dimensions [mm] | 50x156x135 |
Operating environment | Operating temperature range: -40…80℃ Operating humidity: 5…95% (no condensation) |
Power | 12-48 VDC, 24 VAC (possibility of using two power supplies for redundancy) |