Name: CV708ZKIB-F4N1 - Bullet 4 in 1 - 1/2.7" Aptina© 2.1 Mpx AR0237, 6~22 Vari-focal
Price: 82.00 EUR
Availability: InStock

View cart “Industrial PoE Switch: ULTIPOWER 124P-4POE-20 (4xFE PoE, 2xFO SC, 100Mbps 20 km)” has been added to your cart.

-15%

CV708ZKIB-F4N1 – Bullet 4 in 1 – 1/2.7″ Aptina© 2.1 Mpx AR0237, 6~22 Vari-focal

~~96.00 €~~ 82.00 €

Description

Name	POE084832
Code	M18278
Input voltage	176-264 VAC, 50 Hz
Output voltage range	45.6-52.8 VDC
Max output power	153.6 W
Rated efficiency	87%
Max total output current	3.2 A @ 48 V
Number of outputs	8
Max output current of individual outputs	0.4 A @ 48 V
Short circuit protection	fuses or PTCs
Overload protection	automatic
Overvoltage protection	automatic
Operating temperature	-10°C…40°C
Dimensions (W x H x D)	270 x 307 x 116
Weight	3.7 kg
Remarks	Metal housing, 15 mm spacing between the rear panel and wall

Name	ULTIPOWER 0054at
Code	N29990
Standards and protocols	IEEE802.3, 802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP
Forwarding rate	10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port
Transmission method	Store-and-Forward
Ports	5x RJ45 10/100Mb/s (incl. 4x PoE); auto-negotiation, auto MDI/MDIX
Cabling requirements	10Base-T: UTP cat. 3, 4 or 5 (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) 100Base-Tx: UTP cat. 5 or 5e (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m)
LED indicators	Power, Link/Act, 100M, PoE Status
Certification	CE
Dimensions [mm]	120x87x30
Environment	Operating temperature range: 0°C…40°C Storage temperature range: -40°C…70°C Operating humidity range: 10%…90% (no condensation) Storage humidity range: 5%…90% (no condensation)
Power	230 VAC
Other features	Support for PoE (PD) devices compliant with IEEE 802.3af and 802.3at standards Support for auto-learning and auto-aging of MAC addresses Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode

Name	HIKVISION DS-2CD2642FWD-I
Code	K1776
Video system	IP
Housing type	Compact
Compression	H.264/H.264+/MJPEG
Resolution	2688 x 1520
Dual-stream	Yes
Frame rate	20 fps at 2688 x 1520 25 fps at 1920×1080 or lower res.
Image sensor	1/3″ Progressive Scan CMOS
Sensitivity	0.01 lx @F1.2 with AGC 0 lx in IR mode
Lens	2.8-12 mm
Horizontal viewing angle	112^o– 33.8^o
Mechanically switching IR filter	Yes
IR range	up to 30 m
Brightness control	Yes
Sharpness control	Yes
Video processing	3D-DNR, WDR(120dB), BLC
Gain	Automatic/Preset
Alarm events	Motion detection, dynamic analysis, tampering
Intelligent image analysis	Yes
Line crossing	1 line
Intruder detection	1 region
ROIs	1 region
Recording	Remote FTP server, NAS server
Network interface	RJ-45 10/100Base-T
Protocols	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Supported standards	Onvif, PSIA,CGI, ISAPI
Power	12 VDC ± 10% PoE IEEE 802.3af
Power consumption	Max 7.5 W
Startup temperature range	-10°C …+40°C
Operating temperature range	-30°C …+60°C
Dimensions	95 × 105 × 258 mm
Weight	1.2 kg

Name	ULTIPOWER 0054af
Code	N29980
Standards and protocols	IEEE802.3, 802.3u, 802.3ab, 802.3x CSMA/CD, TCP/IP
Packet Filtering / Forwarding Rates	10BASE-T: 14880 pps/port 100BASE-TX: 148800 pps/port
Transmission method	Store-and-Forward
Ports	5x RJ45 10/100 Mbps (auto-negotiation, Auto MDI/MDIX), 4 of them with PoE option
Cabling requirements	10Base-T: UTP cat. 3, 4 or 5 (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m) 100Base-Tx: UTP cat. 5 or 5e (up to 100 m) STP EIA/TIA-568 100 Ω (up to 100 m)
LED indicators	Power, Link/Act, 100M, PoE Status
Certificate	CE
Dimensions [mm]	120x87x30
Environment	Operating temperature range: 0℃…40℃ Storage temperature range: -40℃…70℃ Relative humidity range: 10%…90%, without condensation
Power	230 VAC
Other features	Support for (PD) PoE devices compliant with IEEE802.3af standard Support for auto-learning and auto-aging, 1k MAC address entries Support for bandwidth control in full duplex (IEEE802.3x) and a back-pressure function in half-duplex mode